Crafty DIY Asphalt Repair
Asphalt is a strong material that can last for many years, but it does need to be repaired from time to time. There are two ways of repairing asphalt: patching and overlaying. Patching is done when there has been damage from an accident or other event, whereas overlaying is used to restore the original condition of the surface. Grand Haven Asphalt Repair can give you advice on DIY Asphalt Repair – here are the basics!
First, you will need to clean the surface of the asphalt. This can be done with a broom or blower. After the surface is clean, you can begin to patch the asphalt. You will need a cold mix asphalt patching compound and a tamper. Apply the patching compound to the hole or crack using a trowel, then tamp it down.
Then, you can begin to add the asphalt overlay. You will need a cold mix asphalt and an application machine, such as a spreader or squeegee. Apply the warm mix asphalt with the machine and smooth it out until you get your desired result.
Finally, you will need to clean up the excess asphalt. This is done with a broom or blower. You can also use water, if necessary. If you followed these steps, then you have successfully completed DIY asphalt repair! Your driveway or parking lot will look good as new!
Let’s recap! The process of DIY asphalt repair includes three steps: cleaning the surface; patching any damage; and applying an overlay for restoration purposes. It may seem like there are many steps involved in this process, but it can actually be quite simple – especially when you follow these instructions carefully!…